02/05/2017

Cisco – Config Register Werte

Default ist normal 0x2102

 

Configuration Register Setting Router Behavior
0x102
  • Ignores break
  • 9600 console baud rate
0x1202
  • 1200 console baud rate
0x2101
  • Boots into bootstrap
  • Ignores break
  • Boots into ROM if initial boot fails
  • 9600 console baud rate
0x2102
  • Ignores break
  • Boots into ROM if initial boot fails
  • 9600 console baud rate
  • default value for most platforms
0x2120
  • Boots into ROMmon
  • 19200 console baud rate
0x2122
  • Ignores break
  • Boots into ROM if initial boot fails
  • 19200 console baud rate
0x2124
  • NetBoot
  • Ignores break
  • Boots into ROM if initial boot fails
  • 19200 console baud rate
0x2142
  • Ignores break
  • Boots into ROM if initial boot fails
  • 9600 console baud rate
  • Ignores the contents of Non-Volatile RAM (NVRAM) (ignores configuration)
0x2902
  • Ignores break
  • Boots into ROM if initial boot fails
  • 4800 console baud rate
0x2922
  • Ignores break
  • Boots into ROM if initial boot fails
  • 38400 console baud rate
0x3122
  • Ignores break
  • Boots into ROM if initial boot fails
  • 57600 console baud rate
0x3902
  • Ignores break
  • Boots into ROM if initial boot fails
  • 2400 console baud rate
0x3922
  • Ignores break
  • Boots into ROM if initial boot fails
  • 115200 console baud rate

Source: http://www.cisco.com/c/en/us/support/docs/routers/10000-series-routers/50421-config-register-use.html